- TOP - Rough BLACK side where pet lies on
- BASE - GREY Material
Water resistant Polypropolene
NON ABSORBENT highest grade grade quality Primafill Fibre
WE DO NOT USE ANY CHEMICAL REPELLENTS ON OUR PRODUCT
⚫ Shake every 2nd day (from corner to corner) to fluff up and instantly crate a puffier appearance.
⚫ To remove hair: shake, use rubber brush or vacuum.
⚫ Once a week: use wet cloth with detergent to wipe top, as some dogs have an oily skin.
(More often if dog has oily skin or wet skin irritation)
- STANDARD WASHING
e.g. if PETZBED is muddy:
Place upside down (black side facing down) on washing line.
Hose lightly at 45° angle against bed, for any dirt to fall off with the water.
No need to spray directly into the mattress and only a light water pressure is necessary
Should there be a bit of water inside the PETZBED (by accident hosed too much into it):
Squeeze out excess water and leave to dry upside down on washing line / drying rack.
Upside down: As the Base (grey) is water resistant (acts as insulation) the Top (black) side is porous.
The PETZBED does not need soaking.
- EXTREME WASHING
e.g. in case of urinating, vomiting, bleeding:
Hose stronger into the product, for any foul liquid to drain out.
Detergent can be used.
The PETZBED can be soaked in water with detergent, but it is recommended that only the affected areas get soaked. (as opposed to the whole bed, as this will take longer to dry)
Important: Please ensure that you squeeze ALL excess water out of the PETZBED and dry upside down.
Please note: it will take longer to dry, if it has been soaked.
The spin cycle of the washing machine can be used too.
Do not tumble dry.